Removing Panels
Rear Quarter Panel Removal Vid Feb 8/2021 Today I drilled out the last few spot welds holding the rear left quarter panel on and removed it. This is a big job and it's easy to get impatient and make a mess of things. I will need to re-use the upper half of the rear quarter panels so I took my time and spread the work out over the past couple of weeks. I'm quite satisfied with the result. Removing the panels was not absolutely essential as I could have simplified things by cutting away the lower half only, but in order to have full access to the outer wheel well and rear tray for repairs and rust removal, I felt that this was the most effective approach. This rear tray area is not available from supplier so and i'll need to fabricate a replacement Outer Wheel Well/House: Believe it or not, this is the better of the two Thankfully the rust damage to inner rocker is minor This channel is hidden away but quite vulnerable to rusting from within....